气动薄膜调节阀对工业生产的影响非常大，如果真的是想要保证好后续的工作不受到影响，调节阀的使用还是非常重要，一旦出现问题，都有可能会导致整体设备的故障。而且现在基本上执行器、设备开关门等都是需要使用到调节阀，所以必须要定期对设备进行检查，一旦出现问题及时调整才是更为重要的。但是如果这类调节阀出现不动作的情况，应该如何来进行处理呢?

Pneumatic diaphragm control valves have a significant impact on industrial production. If you really want to ensure that subsequent work is not affected, the use of control valves is still very important. Once problems occur, it may lead to overall equipment failure. Moreover, nowadays, actuators, equipment opening and closing doors, etc. all require the use of regulating valves, so it is necessary to regularly inspect the equipment and make timely adjustments in case of problems. But if this type of regulating valve fails to operate, how should it be handled?

检查好气源压力的情况

Check the pressure of the air source

正常使用气动薄膜调节阀，那么肯定还是应该做好气源压力方面的检查，这样才能够让我们知道具体的故障情况到底如何。多数情况下调节阀都是质量比较不错的，如果真的是想要保证很好的使用效果，就应该定期进源故障方面的检查。如果真的是气源没有问题，再去进行其他方面的检查，这样恢复好调节阀的使用自然也是要更加容易一些，大家还是可以放心。

If using a pneumatic diaphragm control valve normally, it is definitely necessary to check the pressure of the air source in order to let us know the specific fault situation. In most cases, regulating valves are of good quality. If you really want to ensure good performance, you should regularly check for air source faults. If there is really no problem with the air source, then go for other inspections. This way, it will be easier to restore the use of the regulating valve, and everyone can still rest assured.

进行定位器等设备检查

Conduct equipment inspections such as locators

如果本身气源原来就是正常的，经过测试没有太大的问题，那么肯定还是需要进行定位器或者是电器转换器等方面的检查，看一下是否有输出。气动薄膜调节阀尽可能还是要先将其放大，确定好是否有输出才行，如果没有输出，那么就进行放大器恒节流孔的检查，确实是否有堵塞等。建议还是应该做好整体上的环节检查，每一个设备内部都进行检查，自然也可以让我们放心。

If the original air source is normal and there are no major problems after testing, then it is definitely necessary to check the locator or electrical converter to see if there is output. As much as possible, the pneumatic diaphragm control valve should be enlarged first to determine whether there is output. If there is no output, then check the constant throttle hole of the amplifier to see if there is any blockage. It is recommended to conduct a comprehensive inspection of the entire process, and inspect the interior of each device, which can naturally give us peace of mind.